How DO They Work?

Ground source heat pumps differ depending on how the pipes are laid. The three main configurations are:

  • Horizontal ground-loops
  • Coiled ground-loops
  • Bore-hole.

In the horizontal ground-loop configuration, an area in your garden, depending on the size of your system, is excavated to a depth of approximately 1.5 -2m. Next pipes are laid in a similar fashion  to the pipes you would see on the back of a fridge.

A coiled ground-loop system follows a similar procedure to the horizontal ground-loop configuration. However, because coiled loops allow more surface area in a smaller space than horizontal ground-loops, less area needs to be excavated. However, the downside to coiled ground-loops is that because the pipes overlap, they compete for the same heat meaning that this setup is less efficient than the former.

If you have limited space to install a ground source heat pump then a bore-hole could be a possible option. This involves a hole, approximately 6 inches in diameter, being drilled to a depth of 60-100m. A number of pipes are then fitted in the hole to collect the heat. The depth and number of bore-holes you need will, again, depend largely on the size of the system you wish to install. Although bore-holes take up much less space than ground-loops, the cost to drill the hole can be expensive.

Whatever pipe configuration you choose the way the system works will be the same:

  • A special anti-freeze solution is cycled through the pipes by the pump, collecting heat from the ground which is at a constant temperature of 10 – 12° C at that depth
  • When the solution reaches the water cylinder, stored indoors, a compressor boosts its temperature to the required level depending on your heating system
  • The high temperature solution is run through sealed pipes contained in a water tank, which heats the water ready for use
  • The heated water from the tank is circulated through your central heating system to heat your home
  • The cooled solution flows back to the ground to collect more heat.


We are accredited with a number of codes, practises and are also partnered with reputable companies within the renewable energy sector
Fronius Service Partner
Tesla Powerwall
Solar Edge
Chamber Business Awards
Renewable Energy Consumer Code
Solar Trade Association
Farmers Weekly
Advance Solar Installer

Let us help you on your renewable energy journey

Sign up for our latest energy news!